September 02, 2018

One of the best things about hairpin legs is how easily you can personalise them. Their versatile shapes and colours work wonders on any project – from colourful upcycled storage units, to industrial-style dining tables.

To give you plenty of choice, we make our legs in 13 different powder coats and metallic finishes – including whitepastel green, and industrial brass.

Coloured hairpin legs

Colourful hairpin projects by @idainteriorlifestyle and @helloretrodesign

But if you want full control of the finished look, you may want to get creative and paint them yourself.

Here’s how to do it properly, so you get a quality, long-lasting result.

Which hairpin legs are best to paint?

Raw steel hairpins will get you the best result. They’re unfinished, so they’re your very own blank canvas.

Cleaning your legs

Make sure your legs are really clean before you start painting them, or your paint won’t stick.  

Our raw steel hairpins have a thin rust-resistant coating, which you’ll need to remove.

We find the best way to get it off is to use a little bit of degreaser, such as acetone, and a dishwashing pad.

Priming

Why use primer?

A lot of people skip this step, because it doesn't make much difference visually.

They're missing a trick though, as it makes sure the paint sticks to the steel. You'll want to do it to prevent your paint chipping off over time.

What primer should I buy?

Acid primer in a spray can is our preferred method, as it’s specifically designed for metal. You’ll find it in most car shops, or online.

How to apply it

Apply at least two coats of primer. It’s best to spray it thin, so it doesn’t run. Then, leave it for at least 24 hours. This will ensure your hairpin legs don’t rust under the paint.

Painting

What should I use to paint my hairpin legs?

Painted bronze hairpin legsGold hairpin legs

Rustoleum paints are great for a metallic finish, as used by queen of upcycling – @ElizabethDotDesign. They’ll give you a much higher quality finish than cheap rattle cans.

How to apply it

Paint hairpin legs

Fluro hairpins, painted by @vintageretrograms

Apply 2-3 thin, even coats – allowing 3-5 hours’ dry time between.

Once you’re done painting, leave your legs somewhere well-ventilated for 24-48 hours.

And when they’re finally dry, you can attach them to your new piece of furniture!

Show us your true colours

We love sharing your creations with our followers, so feel free to tag us @thehairpinlegco when you’re done. You might even inspire us to make a new colour option!

As always, we’re here to help. If you’ve got any questions, give us a shout in the comments below, or contact us.

Happy painting :-)


Leave a comment

Welcome!

It looks like you are viewing from the United States. Why not checkout our US website?

No Thanks Take me there!